Utilidad gratuita en el navegador
Cut List Calculator
Use a first-fit decreasing layout to estimate stock-board count and show each board cutting plan.
✓ Procesamiento local✓ Sin registro✓ Sin subir archivos
Cargando herramienta…
Antes
Stock 96 in; cuts 40, 40, 12, 12
→
Después
2 stock boards with layouts
Cómo usar Cut List Calculator
- Introduce medidas y selecciona los supuestos del proyecto.
- Ejecuta el cálculo y revisa el resultado principal.
- Lee los valores intermedios, fórmulas y advertencias.
- Copia o descarga la estimación antes de cambiar los datos.
Privacidad y procesamiento local
El procesamiento, la generación de documentos y los cálculos se realizan en el navegador. No se incluye un punto de subida, analítica ni API remota. Evita introducir datos sensibles en sitios que no controles.
Fórmula o método
Each additional cut consumes the entered saw-kerf allowance; layout is an estimate rather than an optimized industrial nesting solution.
Qué incluye esta herramienta
- instant local calculation
- clear assumptions and intermediate values
- copyable material estimate
Usos habituales
- project planning
- material purchasing
- quote preparation
Consejos prácticos
- Measure the real installation area rather than relying only on nominal dimensions.
- Round purchase quantities up and verify manufacturer requirements.
Preguntas frecuentes
Does Cut List Calculator upload my data?
No. The included tool runs locally in your browser and does not send the entered content to a processing server.
Can I use the result commercially?
The generated result is based on your own input. Review it for accuracy and any third-party rights before commercial use.